HDMI延长器在单100m/328ft同轴电缆红外控制
HDMI Extender
Over single100m/328ftCoaxial Cables with IR Control
User manual
Thank you forpurchasing this product. For optimum performance and safety, please read theseinstructions carefully before connecting, operating or adjusting this product.Please keep this manual for future reference.
I. Introduction
The HDMI extenderover 1 coaxial cable with IR control is the right way to send your HDMI signal overlong distances. Instead of using expensive HDMI cables, this device lets youuse your existing coaxial cables/sockets while also performing the samefunctions like transferring Deep Color (12 bits/color) video, all with abandwidth up to 225MHz. And if that weren’t enough, you can use your existingremote to control your device through an IR blaster.
II. Features
1. Compliant withHDMI 1.3, HDCP 1.1 standards.
2. Supports digitalvideo formats in Deep Color Mode at up to 36 bits (12bits/color) and 48KHz LPCMDigital audio.
3. Equalizes andrecovers incoming TMDS data before re-transmitting it in high quality,regardless of the incoming signal quality.
4. Super IR controlsystem, IR transport channel can be forward or backward.
III. Package
1. HDMI Transmitter 1Pcs
2. HDMI Receiver 1Pcs
3. IR Tx cable 1Pcs
4. IR Rx cable 1Pcs
5. 5V1ADC Power Supply Adaptor (2 Pcs)
6. Product Manual
IV. Specifications
HDMI Transmitterports 1 x HDMI,1x IR Tx, 1xBNC
HDMI Receiver ports 1x HDMI,1x IR Rx, 1xBNC
Power Supply 2x 5V1ADC
ESD ProtectionHuman body model ±8kV (air-gap discharge) ,
±4kV (contactdischarge)
Dimension 80mmx 41mm x 25 mm
Weight 150g
OperatingTemperature 0°C ~40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20 ~ 90% RH (Non-condensing)
V. Connect and Operate
Connect the signalsource such as Blu-Ray Player, Play Station 3, audio/video receiver, cable or satellitereceivers equipped with HDMI output interfaces with a short high-speed HDMIcable to the HDMI Transmitter input. HDMI cable length should not exceed 16 ft.
Connect the HDMITransmitter output BNC ports using single RG6 coaxial cables to includedReceiver. It is strongly recommended that factory terminated cable assembliesbe used and their length shall not exceed 328 ft respectively.
Connect the HDMIoutput from the Receiver to high-definition display devices such as HD-LCD,HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cablesthat are recommended for the distances that are required for each connection.HDMI cable length should not exceed 16 ft.
The source can becontrolled from the display. This is accomplished by using an optional IRReceiver pigtail pointing away from the display, which can be connected to thereceiver portion of the extender. The IR Transmitter pigtail is then connectedto the Transmitter of the extender and pointed at the source.
VI. Application Example
联系 人:李坤华
电话:
手机:/
QQ:2457601443/2518185488
旺旺:时代次方科技
公司邮箱:sales8@otime.biz
公司网址:http://www.otime.biz/
阿里巴巴:http://otime9.1688.com/
广东深圳市宝安区福永街道桥头工业区
期待你的来电