深圳市时代次方科技有限公司

　　HDMI 1.4矩阵组件6x2

　　HDMI 1.4 Matrix 6x2

　　Thank you for purchasing this product. Foroptimum performance and safety, please read these instructions carefully beforeconnecting, operating or adjusting this product. Please keep this manual for futurereference.

　　I. Introduction

　　The HDMI matrix 6x2with 4kx2k supported which allows HDMI signal from any of its six sources to berouted to and displayed on any of its two connected HDMI displayssimultaneously. It supports 3D, 3Gbps bandwidth, 12-bit Deep Color, Hi-Deflossless audio and other features defined by HDMI specifications. Themanagement of source/ sink scenarios can be operated easily through on-panelbuttons, IR remote control.

　　II. Features

　　Compliant with HDMI1.4a, CTS1.4a, DVI 1.0.

　　HDMI 1.4 support:Audio Return Channel (ARC), 3D TV support, CEC1.4.

　　Support 3D Video& 4Kx2K, 8, 10, 12 & 16 bits per color depth.

　　Support MHL input,Share your smart phone photos, music and movies on the TV.

　　Support PIP displayfunction.

　　Audio support: HDMI1.4 compatible audio interface Dolby TrueHD DTS-HD Master Audio 7.1CH

　　Full audio inputand output support

　　III. Package

　　HDMI 1.4 Matrix6*2------------------------------1PC

　　5V DC Power SupplyAdapter---------------------1PC

　　Remotecontrol---------------------------------------1PC

　　Operation Manual----------------------------------1PC

　　MHL to HDMI Cable (optional)

　　IV. Specifications

　　Frequency Bandwidth 2.97Gbps

　　Input Ports 6 x HDMI Female.

　　Output port 2 x HDMI Female; 1x Toslink,1x Earphone

　　HDMI Audio Output PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1, D-TrueHD, DTS-HD

　　Power Supply 5V/1ADC(US/EU standards, CE/FCC/UL certified)

　　ESD Protection Human Body Model: ± 8kV (air-gapdischarge)

　　± 4kV (contact discharge)

　　Dimensions (mm) 250(D) x110 (W) x 26(H)

　　Weight (g) 720

　　PowerConsumption(max) 5W

　　OperatingTemperature 0?C ~ 40?C / 32?F ~104?F

　　Storage Temperature -20?C ~ 60?C / -4?F ~ 140?F

　　V. Operationcontrols and Functions

　　Front Panel

　　ON/OFF: Poweron/off switch.

　　Input LED: Thesered LED illuminate when the output select to the corresponding input.

　　Audio EDID LED:These red LED illuminate when the audio EDID select to corresponding audio.

　　ARC LED: This redLED illuminate when the ARC function open.

　　POWER LED: This redLED illuminate when the device is connected with power supply.

　　OUTA: Press thisbutton to select the input source to HDMI OUT A.

　　OUTB: Press thisbutton to select the input source to HDMI OUT B.

　　EDID: Press thisbutton to select the 2.0CH,5.1CH,7.1CH audio output mode.

　　ARC：Press this button to open or close the ARC function.

　　RST: Press thisbutton the matrix will reset to factory state(INPUT1, 2.0CH AUDIO MODE,ARCfunction closed)

　　Rear Panel

　　Input Source: Theseslots are where you connect the HDMI source output from DVD, PS3.

　　HDMI OUT: This slotis where you connect the HDTV or monitor with HDMI cable.

　　Toslink OUT: Thisslot is where you connect to the amplifier with optical fiber cable.

　　Stereo OUT: Thisslot is where you connect to the speaker with3.5mmearphone cable.

　　DC IN: Plug the 5VDC power supply into the unit and connect the adapter to AC wall outlet.

　　Attention:

　　1. The Toslink andStereo audio follow the OUT A HDMI audio.

　　2. The In6 supportMHL input only,use MHL to HDMI Cable to connect smart phone and matrix.

　　Remote control

　　STANDBY: Press this button will standby or power on the matrix.

　　Audio EDID: Press this button will Select the audio output

　　mode (2.0CH,5.1CH,7.1CH), and the LED willindicate

　　the correspondingstate .

　　ARC:Press this button will Open or close the ARC function,

　　and the LED willindicate the corresponding state.

　　PIP:Press this button will Open or close the PIP function. The PIP function canonly work when OUTA and OUTB select the same input source.

　　Select: Press this button will select the PIP source.

　　Enter: Press thisbutton will confirm the select PIP source.

　　OUTA:Press these button will fast switch to select input source to HDMI OUTA. andthe LED will indicate the corresponding input source.

　　OUTB: Press thesebutton will fast switch to select input source to HDMI OUTB. and the LED willindicate the corresponding input source.

　　ARC function: If you need use ARC, your HDTV must support this function, When youopen the ARC function, the Toslink of the Matrix will output the HDTV currentdisplay content audio. Otherwise will output the Matrix input source audio.

　　VI. Application Example

　　联系 人：李坤华

　　电话：

　　手机:/

　　QQ：2457601443/2518185488

　　旺旺：时代次方科技

　　公司邮箱：sales8@otime.biz

　　公司网址：http://www.otime.biz/

　　阿里巴巴：http://otime9.1688.com/