HDMI矩阵2× 2
HDMI Matrix 2 x 2
User manual
Thank you forpurchasing this product. For optimum performance and safety, please read theseinstructions carefully before connecting, operating or adjusting this product.Please keep this manual for future reference.
n Introduction
HDMI Matrix 2 x 2 is a 2-by-2DVI/HDMI matrix with 4Kx2K. It allows any source (Blue-Ray player, HD DVDplayer, satellite receiver, game system, etc.) to be shown on the any of the twodisplays simultaneously, no matter the source is HDCP or not. Extra infraredreceiver port is supplied for remote control. It offers solutions for digitalentertainment center, HDTV retail and show site, HDTV, STB, DVD and projectorfactory, noise, space and security concerns, data center control, informationdistribution, conference room presentation, school and corporate trainingenvironments, etc..
n Features
1. Supportdisplay resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
2. 3D HDMI1.4avideo formatsupport.
3. 3Dvideo support including Frame packing for all 3D formats up to a 297MHz TMDSclock.
4. Supports deep color upto 48-bit per pixel.
5. HDCP 1.4 support(input), HDCP v1.4aprotocol compliant(output).
6. Supportsthe reception of any audio data conforming to the HDMI specification 1.4 such adL-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.
7. Fullcolorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamutcolor.
8. Operatesfor TMDS clock frequencies up to 300MHz.
n Package
1. HDMI Matrix------------------------------------------------------------------------------1PC
2. 5V1ADCPower Supply adapter -------------------------------------------------------1PC
3. Operation Manual------------------------------------------------------------------------- 1PC
4. Remote control------------------------------------------------------------------------------1PC
n Specifications
1. FrequencyBandwidth 2.97Gbps
2. Input Ports 2 x HDMI Female input ports
3. Output Ports 2 x HDMI Female output ports
4. Power Supply DC 5V1A
5. ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contactdischarge)
6. Dimensions (mm) 70(W) X 145 (D) X 25 (H)
7. Weight(g) 300
8. Operating Temperature 0°C~40°C/32°F~104°F
9. Storage Temperature -20°C~60°C/-4°F~140°F
10. Relative Humidity 20 ~90% RH (Non-condensing)
11. Power Consumption (Max) 5W
n Operation controls and Functions
Front Panel
1. ON/OFF: Power on/off switch.
2. POWER LED: This red LED illuminate when the device is connected with power supply.
3. INPUT LED: These red LED illuminate when the output select to the correspondinginput.
4. EDID LED: These red LED illuminate when the EDID select to corresponding items.
2.0CH LED illuminate indicate that force to output 2.0CH audio and 1080Pvideo.
5.1CH LED illuminateindicate that force to output 5.1CH audio and 1080P video.
7.1CH LED illuminateindicate that force to output 7.1CH audio and 1080P video.
AUTO LED illuminateindicate that in AUTO mode.
5. IR IN: Remote control signal receive.
6. OUTPUT A: Press this button to select the input source to HDMI OUT A.
7. OUTPUT B: Press this button to select the input source to HDMI OUT B.
8. AUDIO: Press this button to select the 2.0CH, 5.1CH, 7.1CH audio output mode.
9. AUTO: Press this button to intoAUTO mode.
Real Panel
1. HDMI OUTPUT: These slots are where you connect the HDTV or monitor with HDMI cable.
2. HDMI INPUT: These slots are where you connect the HDMI source output from DVD, PS3.
3. DC IN: Plug the 5V DC power supply into the unit and connect the adapter to ACwall outlet.
n Application Example
n Remote control
STANDBY: Press this button will standby or power onthe matrix. When in standby mode, all the LED except power LED will get dark.
AUTO: Press this button will set output A and B to read andcompare the EDID from TV, and then get the same parameter to display on TV.When in auto mode the AUTO LED will illuminate.
2.0CH: Press this button will force A and B output 2.0CH audioHDMI signal.
5.1CH: Press this button will force A and B output 5.1CH audioHDMI signal.
7.1CH: Press this button will force A and B output 7.1CH audio HDMI signal.
OUTA: Press these buttons will fast switch to select inputsource to HDMI OUTB, and the LED will indicate the corresponding input source.
OUTB: Press these buttons will fast switch to select inputsource to HDMI OUTB, and the LED will indicate the corresponding input source.
联系 人:李坤华
电话:
手机:/
QQ:2457601443/2518185488
旺旺:时代次方科技
公司邮箱:sales8@otime.biz
公司网址:http://www.otime.biz/
阿里巴巴:http://otime9.1688.com/
广东深圳市宝安区福永街道桥头工业区
期待你的来电