深圳市时代次方科技有限公司

　　数字到模拟音频转换器

　　digital to analog audio converter

　　tableof contents

　　1.0introduction ……………………….…….……...2

　　2.0 specifications………………..……..…..….…….4

　　3.0 packagecontents…………………….…………6

　　4.0 paneldeions………………………………6

　　5.0 connection andoperation……...………………7

　　dear customer

　　thank you forpurchasing this audio converter.

　　for optimumperformance and safety, please read these instructions carefully beforeconnecting, operating or adjusting this product. please keep this manual forfuture reference

　　1.0 introduction

　　this digital toanalog audio converter is designed for eitherhome or professional audio switching. it converts coaxial or toslink digitalaudio signals to analog l/r audio and available for connection to an externaldevice such as an amplifier via standard rca-style jacks. this converter issmall in size and quite easy to install.

　　1.1 features

　　this converter hasmany features that enable it to perform in a superior manner. among thosefeatures you will find:

　　1. converts coaxialor toslink digital audio signals to analog l/r audio

　　2. supportssampling rate at 32, 44.1, 48 and 96 khz.

　　3. 24-bit spdifincoming bit stream on left and right channels

　　4. provideselectromagnetic-noise-free transmission.

　　5. easy to installand simple to operate.

　　2.0 specifications

　　3.0 package contents

　　before attempting to usethis unit, please check the packaging and make sure the following items arecontained in the shipping carton:

　　1).main unit (digital to analog audio converter).

　　2). dc 5v power supply

　　3) user’s manual.

　　4.0 panel deions

　　please study thepanel drawings below and become familiar with the signal input(s);output(s) andpower requirements.

　　5.0 connection and operation

　　beforeinstallation, please make sure all devices you wish to connect have been turnedoff.

　　1) connect theaudio source device to the converter using appropriate toslink or coaxialcables.

　　2) connect the a/vreceivers or amplifiers to the converter using appropriate l/r cable.

　　3) insert the dcside of 5v power supply into the converter and then connect the ac side of thepower supply into the wall outlet.

　　note: whenconnected to the toslink and coaxial cables at the same, the product will givepriority to toslink input